klinders5 wrote:@UBNT-stig can you better explain the initial-delay and interval setting? It seems self explanintory but I set the initial-dealy at 5, the interval at 5 and the failures at 3 and from what I could tell it was sending 3 pings every 5 seconds and the pings were only about 1 second apart. So when the primary went down it only took about 5 seconds for it to fail over. I was expecting it to take 15 seconds (1 ping every 5 seconds for 3 pings).
Initial-delay is for boot-up. If the ping watchdog started with 0 delay then the ping's might fail as the rest of the system is being configured. The default is 60 seconds, but some need time for bgp to converge and may want a longer delay. Interval of 5 and failure count of 3 should be 15 seconds, but if the link goes down it probably fails quicker.
