Another port forwarding post

Hi Guys,

I installed the EdgeRouter PoE load balanced over 2 WAN's. It works perfectly, but now I'm trying to forward ports to my machines behind the router and I've read a lot of posts but am still not able to get it working.  I just want to forward port 8888 to address 10.0.0.6 port 80. I've succesfully changed the GUI port and can access the GUI remotely, I would think that it's the same logic as this but no dice.

Can anyone please help?

I have a fixed IP from my ISP and no ports are blocked.

Thanks a lot!

Below is my current configuration:

firewall {
    all-ping enable
    broadcast-ping disable
    group {
        network-group PRIVATE_NETS {
            network 192.168.0.0/16
            network 172.16.0.0/12
            network 10.0.0.0/8
        }
    }
    ipv6-receive-redirects disable
    ipv6-src-route disable
    ip-src-route disable
    log-martians disable
    modify balance {
        rule 10 {
            action modify
            description "do NOT load balance lan to lan"
            destination {
                group {
                    network-group PRIVATE_NETS
                }
            }
            modify {
                table main
            }
        }
        rule 20 {
            action modify
            description "do NOT load balance destination public address"
            destination {
                group {
                    address-group ADDRv4_eth0
                }
            }
            modify {
                table main
            }
        }
        rule 30 {
            action modify
            description "do NOT load balance destination public address"
            destination {
                group {
                    address-group ADDRv4_eth1
                }
            }
            modify {
                table main
            }
        }
        rule 70 {
            action modify
            modify {
                lb-group G
            }
        }
    }
    name WAN_IN {
        default-action drop
        description "WAN to internal"
        rule 10 {
            action accept
            description "Allow established/related"
            state {
                established enable
                related enable
            }
        }
        rule 30 {
            action drop
            description "Drop invalid state"
            state {
                invalid enable
            }
        }
    }
    name WAN_LOCAL {
        default-action drop
        description "WAN to router"
        rule 10 {
            action accept
            description test
            destination {
                port 8888
            }
            log enable
            protocol tcp_udp
            state {
                established enable
                invalid enable
                new enable
                related enable
            }
        }
        rule 20 {
            action accept
            description "Allow established/related"
            state {
                established enable
                related enable
            }
        }
        rule 30 {
            action drop
            description "Drop invalid state"
            state {
                invalid enable
            }
        }
        rule 40 {
            action accept
            description "Remote access"
            destination {
                port 8081,443,22
            }
            log enable
            protocol tcp
        }
    }
    receive-redirects disable
    send-redirects enable
    source-validation disable
    syn-cookies enable
}
interfaces {
    ethernet eth0 {
        address dhcp
        description WAN
        duplex auto
        firewall {
            in {
                name WAN_IN
            }
            local {
                name WAN_LOCAL
            }
        }
        poe {
            output off
        }
        speed auto
    }
    ethernet eth1 {
        address dhcp
        description "WAN 2"
        duplex auto
        firewall {
            in {
                name WAN_IN
            }
            local {
                name WAN_LOCAL
            }
        }
        poe {
            output off
        }
        speed auto
    }
    ethernet eth2 {
        duplex auto
        poe {
            output off
        }
        speed auto
    }
    ethernet eth3 {
        duplex auto
        poe {
            output off
        }
        speed auto
    }
    ethernet eth4 {
        duplex auto
        poe {
            output off
        }
        speed auto
    }
    loopback lo {
    }
    switch switch0 {
        address 10.0.0.1/24
        description Local
        firewall {
            in {
                modify balance
            }
        }
        switch-port {
            interface eth2 {
            }
            interface eth3 {
            }
            interface eth4 {
            }
        }
    }
}
load-balance {
    group G {
        interface eth0 {
        }
        interface eth1 {
        }
    }
}
port-forward {
    auto-firewall enable
    hairpin-nat enable
    lan-interface switch0
    rule 1 {
        description test
        forward-to {
            address 10.0.0.6
            port 80
        }
        original-port 8888
        protocol tcp_udp
    }
    wan-interface eth0
}
service {
    dhcp-server {
        disabled false
        hostfile-update disable
        shared-network-name LAN {
            authoritative enable
            subnet 10.0.0.0/24 {
                default-router 10.0.0.1
                dns-server 10.0.0.1
                lease 86400
                start 10.0.0.50 {
                    stop 10.0.0.243
                }
            }
        }
    }
    dns {
        forwarding {
            cache-size 150
            listen-on switch0
        }
    }
    gui {
        https-port 8081
    }
    nat {
        rule 5000 {
            description "masquerade for WAN"
            outbound-interface eth0
            type masquerade
        }
        rule 5002 {
            description "masquerade for WAN 2"
            outbound-interface eth1
            type masquerade
        }
    }
    ssh {
        port 22
        protocol-version v2
    }
    unms {
        disable
    }
}
system {
    conntrack {
        expect-table-size 4096
        hash-size 4096
        table-size 32768
        tcp {
            half-open-connections 512
            loose enable
            max-retrans 3
        }
    }
    host-name ubnt
    login {
        user tom {
            authentication {
                encrypted-password ****************
            }
            level admin
        }
    }
    ntp {
        server 0.ubnt.pool.ntp.org {
        }
        server 1.ubnt.pool.ntp.org {
        }
        server 2.ubnt.pool.ntp.org {
        }
        server 3.ubnt.pool.ntp.org {
        }
    }
    syslog {
        global {
            facility all {
                level notice
            }
            facility protocols {
                level debug
            }
        }
    }
    time-zone UTC
}