After configuring my ER-8 for Policy-based routing, my l2tp VPN is no longer assigning the proper IP address that was assigned for my l2tp VPN configuration (172.16.1.x). Instead what has happened is it's grabbing another address somewhere in the chain between my device and the router.
My current network configuration:
ISP-1: 67.53.216.192/27 (eth0)
ISP-2: DHCP Aquired (eth3)
NET-1: 10.15.0.0/24 (eth1)
NET-2: 10.20.0.0/24 (eth2)
L2TP: 172.16.1.1-172.16.1.254
All DHCP Assigned Client Addresses has a policy be routed through eth3
The rest, including static assignments & VPN go through eth0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
> - selected route, * - FIB route, p - stale info
IP Route Table for VRF "default"
S *> 0.0.0.0/0 [1/0] via 67.53.216.193, eth0
S 0.0.0.0/0 [210/0] via 66.8.144.1, eth3
C *> 10.15.0.0/24 is directly connected, eth1
C *> 10.20.0.0/24 is directly connected, eth2
C *> 10.255.255.0/32 is directly connected, l2tp0
C *> 66.8.144.0/20 is directly connected, eth3
C *> 67.53.216.192/27 is directly connected, eth0
My router configuration is attached.
Any assistance would be greatly appreciate!!
Thanks,
Paul