Re: How can I access my router via https://router?

I'm on a mac, but here's the equivalent info:

route get default   route to: default
destination: default       mask: default    gateway: 192.168.1.1  interface: en1      flags: <UP,GATEWAY,DONE,STATIC,PRCLONING>
recvpipe  sendpipe  ssthresh  rtt,msec    rttvar  hopcount      mtu     expire       0         0         0         0         0         0      1500         0

I can get it work if I add an entry to /etc/hosts:

192.168.1.1 router

But that's not something I needed to do with my old router.

Here's my sanitized config:

 firewall {
     all-ping enable
     broadcast-ping disable
     ipv6-receive-redirects disable
     ipv6-src-route disable
     ip-src-route disable
     log-martians enable
     name WAN_IN {
         default-action drop
         description "WAN to internal"
         rule 10 {
             action accept
             description "Allow established/related"
             state {
                 established enable
                 related enable
             }
         }
         rule 20 {
             action drop
             description "Drop invalid state"
             state {
                 invalid enable
             }
         }
     }
     name WAN_LOCAL {
         default-action drop
         description "WAN to router"
         rule 10 {
             action accept
             description "Allow established/related"
             state {
                 established enable
                 related enable
             }
         }
         rule 20 {
             action drop
             description "Drop invalid state"
             state {
                 invalid enable
             }
         }
     }
     receive-redirects disable
     send-redirects enable
     source-validation disable
     syn-cookies enable
 }
 interfaces {
     ethernet eth0 {
         address dhcp
         description Internet
         duplex auto
         firewall {
             in {
                 name WAN_IN
             }
             local {
                 name WAN_LOCAL
             }
         }
         speed auto
     }
     ethernet eth1 {
         description Local
         duplex auto
         speed auto
     }
     ethernet eth2 {
         description Local
         duplex auto
         speed auto
     }
     ethernet eth3 {
         description Local
         duplex auto
         speed auto
     }
     ethernet eth4 {
         description Local
         duplex auto
         speed auto
     }
     ethernet eth5 {
         duplex auto
         speed auto
     }
     loopback lo {
     }
     switch switch0 {
         address 192.168.1.1/24
         description Local
         switch-port {
             interface eth1 {
             }
             interface eth2 {
             }
             interface eth3 {
             }
             interface eth4 {
             }
         }
     }
 }
 service {
     dhcp-server {
         disabled false
         hostfile-update disable
         shared-network-name LAN {
             authoritative enable
             subnet 192.168.1.0/24 {
                 default-router 192.168.1.1
                 dns-server 192.168.1.1
                 lease 86400
                 start 192.168.1.38 {
                     stop 192.168.1.243
                 }
             }
         }
     }
     dns {
         forwarding {
             cache-size 150
             listen-on switch0
         }
     }
     gui {
         https-port 443
     }
     nat {
         rule 5010 {
             description "masquerade for WAN"
             outbound-interface eth0
             type masquerade
         }
     }
     ssh {
         port 22
         protocol-version v2
     }
 }
 system {
     host-name router
     login {}
     ntp {
         server 0.ubnt.pool.ntp.org {
         }
         server 1.ubnt.pool.ntp.org {
         }
         server 2.ubnt.pool.ntp.org {
         }
         server 3.ubnt.pool.ntp.org {
         }
     }
     syslog {
         global {
             facility all {
                 level notice
             }
             facility protocols {
                 level debug
             }
         }
     }
     time-zone UTC
 }