Quantcast
Channel: All EdgeRouter posts
Viewing all articles
Browse latest Browse all 60861

Re: L2TP and IPSec with EdgeOS 1.9.0 not working

$
0
0

bump - any ideas, anyone? It seems related to this thread, but I don't use load balancing.

 

I connected to the VPN while tethering my laptop to my iPhone and got this. The 192.168.78.0/24 subnet is the one I've configured for L2TP clients to get:

 

 

===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      172.20.10.1     172.20.10.10   4250
          0.0.0.0          0.0.0.0         On-link    192.168.78.101     21
        127.0.0.0        255.0.0.0         On-link         127.0.0.1   4531
        127.0.0.1  255.255.255.255         On-link         127.0.0.1   4531
  127.255.255.255  255.255.255.255         On-link         127.0.0.1   4531
      172.20.10.0  255.255.255.240         On-link      172.20.10.10   4506
     172.20.10.10  255.255.255.255         On-link      172.20.10.10   4506
     172.20.10.15  255.255.255.255         On-link      172.20.10.10   4506
   192.168.78.101  255.255.255.255         On-link    192.168.78.101    276
  198.255.225.125  255.255.255.255      172.20.10.1     172.20.10.10   4251
        224.0.0.0        240.0.0.0         On-link         127.0.0.1   4531
        224.0.0.0        240.0.0.0         On-link      172.20.10.10   4506
        224.0.0.0        240.0.0.0         On-link    192.168.78.101     21
  255.255.255.255  255.255.255.255         On-link         127.0.0.1   4531
  255.255.255.255  255.255.255.255         On-link      172.20.10.10   4506
  255.255.255.255  255.255.255.255         On-link    192.168.78.101    276
===========================================================================
Persistent Routes:
  None

 

 

The 172.20.10.x addresses are the ones assigned by my iPhone to my laptop. I do have the box checked in Windows 10 to route all traffic over the VPN (Use Default Gateway on Remote Network). The Automatic Metric box is also checked.

 

 

I have no idea what that 142.254.209.201 address is. It IS a Time Warner address but it's not my Time Warner address, which is the 198.255.225.125 address you see in the route table above.

 C:\Users\david>tracert -d 8.8.8.8

Tracing route to 8.8.8.8 over a maximum of 30 hops

  1   142 ms   109 ms   121 ms  10.255.255.0
  2   114 ms   122 ms   113 ms  142.254.209.201
  3   159 ms   129 ms   129 ms  24.58.224.189
  4   145 ms   128 ms   119 ms  24.58.42.140
  5   143 ms   114 ms   129 ms  24.58.32.68
  6   166 ms   149 ms   157 ms  107.14.19.106
  7   149 ms   145 ms   125 ms  216.3.52.41
  8   166 ms   133 ms   135 ms  216.3.52.54
  9   169 ms   153 ms   161 ms  216.239.57.111
 10   146 ms   157 ms   157 ms  209.85.241.47
 11   207 ms   185 ms   148 ms  216.239.47.45
 12   171 ms   168 ms   146 ms  216.239.43.217
 13     *        *        *     Request timed out.
 14   193 ms   159 ms   158 ms  8.8.8.8

Any ideas? thanks!


Viewing all articles
Browse latest Browse all 60861

Trending Articles